Can I connect 2 phase 120VAC to a power supply rated for 240VAC input? - All About MEAN WELL Power Supplies

If the two phases are 180o out of phase (split phase system), then yes. The resulting voltage will be around 240VAC, so it can be used with power supplies that has input range of 200VAC-240VAC.If the two phases are 120o out of phase, the resulting RMS voltage will be 208VAC, so it should work, but derating might be needed on some models. For a single-phase operation, you should check the input range of the power supply in its datasheet (derating might be necessary at low input voltage).

Resources - All About MEAN WELL Power Supplies

How To Choose an LED Power Supply - LEDSupply Blog

Rated power: 600W. 24V DC 25A output. AC input active surge current limiting. AC input range selected by switch. Forced air cooling by built-in DC

Mean Well SE-600-24 AC to DC Power Supply Single Output 600W 24 Volt 25A

220V Nema 10-30 Receptacle to power Mean Well RSP-2000-48 power

DR-120-48 Power Supply 1 Phase in, output 48 volts DC 2.5 Amps

Mean Well LRS-150-24 Switching Power Supply, Single

Mean Well LED Switching Power Supply Hookup Guide - SparkFun Learn

Single-phase Power Systems, Polyphase AC Circuits

Mean Well 24v Din Power Supply Switching Power Supply 24v

Three-Phase PDU, 8.6kW 208/120V, 48 C13, C19, 5-15/20R Outlets

Power 240W,24V,10A;The model is NDR240-24，Can be used for inductive loads Din rail installation is more convenient, suitable for distribution box

LCLCTC 240W Power Supply;120v to 24v Power Supply 10amp (Input:100-240VAC,Output:24VDC,50/60HZ);PFC Function;Power Supply Adapter Transformer Switch

Mean Well OWA-60U-24 Constant Current + Constant Voltage LED Driver

Ac input active surge current limiting, high efficiency up to 90 percent and built-in active pfc function,pf>0.95 Protections: short circuit /

Mean Well RSP-2400-24 AC to DC Power Supply, Single Output, 24 Volt, 100 Amp, 2.4K Watt, 10.9 L x 7 W x 2.5 H

What hardware would I need to power an arduino uno off of this